Radiation protection lead vest

Radiation protection lead vest details
1.Lead equivalent: 0.35MMPb, 0.5MMPb
2.Radiation protect
3.X-ray radiation protection

 lead vest

Operation attention
1. Before operation, the operator should check the surface packing cloth(inner and outer)of the protective products whether the attenuation equivalent on the mark is suitable to the operator . After  the examination, put on the protective products on your body. Then  start the operation.

2.After the operation,lay the protective products flat or hang them up by coat hangers to avoid breach caused by a long-time fold and avoid radial leak.
2,If the surface of the product is dirty,firstly scrub away by banister brush with liquid of lower density or a little amount of washing powder,then wash with clean water and directly airing it at a well ventilated place.

3. When storing the protective products,put them in the well airy room where untouched the sun shine and far away from the heat source. Mustn't touch with the acid or alkaili chemical products to ensure the service life of them.

4. According to the standard of GB16757-1997, the service life of the protective products is 4-5 years. The user should have a regular examination to them. The examination method is to fondle or bend the clothing by hand and check it by eyes.If the crackle of product exceeds one third of it, the product can not be used any more, must be discarded or renewed.

This article comes from http://www.yh-lead-glass.com/product/Protective-Clothing-Series/Lead-the-Vest/